Physical Science 8Physical Science · Grade 8

Table of Contents

Unit 1: Energy of Motion
Unit 2: Gravity & Energy Related to Position
Unit 3: Electricity & Magnetism
Unit 4: Waves Transmitting Energy & Information
Unit 5: Thermal Energy & Heat Flow
Unit 6: Chemical Energy & Reactions
Unit 3, Chapter 11 · Electricity & Magnetism

Electromagnetic Fields

Big Question

How can a giant crane at a junkyard lift an entire car with a magnet one second, then drop it exactly where it wants a moment later? The secret is that electricity can create magnetism you can switch on and off.

From Electric Current to Magnetism

For a long time, people thought electricity and magnetism were two completely separate things. Then scientists discovered something surprising: whenever electric current flows through a wire, it creates a magnetic field around that wire. Run current through a straight piece of wire and a compass placed nearby will actually twitch and swing to point along the new field, even though there's no permanent magnet anywhere in sight.

This discovery meant that magnetism isn't only something certain materials have naturally, like a chunk of iron. Magnetism can also be created on demand, just by pushing electric charge through a conductor. That single idea is the foundation of an electromagnet: a magnet that only exists because current is flowing through wire.

Unlike a bar magnet you buy at the store, an electromagnet has an on/off switch built right into how it works. No current, no magnetic field. Flip the current on, and a magnetic field appears out of nowhere.

Coils, Cores, and Current: Building a Stronger Electromagnet

A single straight wire carrying current makes a fairly weak magnetic field. But wind that same wire into a coil, called a solenoid, and something powerful happens: the magnetic field from each loop of wire adds together with the fields from all the other loops, creating one much stronger combined field down the center of the coil.

That means the number of turns of wire is one of the biggest factors controlling an electromagnet's strength. Ten loops make a noticeably stronger magnet than two loops, using the exact same wire and the exact same current. Add an iron core through the center of the coil, and the field gets even stronger, because the iron itself becomes magnetized and boosts the effect.

The other major factor is current strength. Crank up the amount of electric current flowing through the coil, and the magnetic field gets stronger right along with it. Turn the current down, and the field weakens. This is exactly why the same electromagnet can be built to lift a soda can one day and a full-size car the next: engineers just adjust the coil's turns and the current running through it.

Electromagnets on the Job

This adjustable, switchable magnetism is incredibly useful. At a junkyard, an enormous electromagnetic crane lowers over a pile of scrap metal, and the operator flips a switch that sends current surging through a massive coil. The resulting magnetic field is strong enough to lift an entire car body straight into the air. When the crane swings the car to the right spot, the operator cuts the current, the magnetic field disappears instantly, and the car drops exactly where it's needed. A permanent magnet could never do that job, because it can't be switched off.

Electromagnets also make doorbells buzz, by pulling a small metal striker against a bell whenever you press the button and complete the circuit. They spin the shafts inside electric motors, using changing magnetic fields to create constant rotation that powers everything from blenders to electric cars. And they run in reverse inside generators, where spinning magnets near coils of wire actually produce electric current, which is how power plants generate the electricity that reaches your house.

In every one of these machines, the same basic rule applies: change the current, change the number of coils, or change the core material, and you change how strong (or weak) the magnetic force becomes.

Three Invisible Fields, One Big Idea

Magnetic fields aren't the only kind of invisible force field in nature. Gravitational fields surround every object with mass and pull other masses toward them, which is why you stay stuck to the ground and why the moon orbits Earth. Electric fields surround every electrically charged object and can push or pull on other charges nearby, static cling and lightning included. And magnetic fields surround magnets and current-carrying wires, pushing or pulling on other magnetic objects.

All three fields share the same big idea: they let objects exert forces on each other without ever touching, and all three get weaker as distance increases. Electric force works a lot like magnetic force in that way. Two charged objects close together pull or push much harder than the same two objects far apart, and the size and type of charge matters too. A strongly charged balloon rubbed on hair will grab tiny bits of paper from close range, but move it a few feet away and the effect vanishes.

Just like with magnets, moving charged objects closer together changes the potential energy stored in the system, and nearby magnetic fields can even influence how charged particles move. That overlap between electricity and magnetism is exactly why scientists eventually realized they aren't really separate forces at all. They're deeply connected, which is exactly what makes electromagnets possible in the first place.

Real-World Connections

MRI Machines

Hospitals use MRI (Magnetic Resonance Imaging) machines that contain some of the most powerful electromagnets on Earth to create detailed images inside a patient's body without any surgery.

Electric Motors in Everyday Devices

Everything from an electric toothbrush to an electric car uses an electromagnet whose field can be precisely controlled by adjusting the current — exactly what makes electric motors spin.

How they tie togetherBoth technologies rely on this chapter's core idea — that electric current creates a controllable magnetic field — and that control is what makes them useful, whether spinning a motor or scanning a body.

Meet the Scientist

BE

Biomedical Engineers

Biomedical engineers design and maintain the electromagnets inside MRI machines, balancing incredibly strong magnetic fields with patient safety. The electromagnets in a hospital MRI are thousands of times stronger than a refrigerator magnet, so engineers must plan for everything from medical implants to loose metal objects in the room.

Key Vocabulary

Bold, underlined words in the reading above are clickable too — tap one to see its definition pop out. Or click or tap a card below to reveal the definition.

electromagnettap to flip
A magnet created by electric current flowing through a coil of wire, which can be turned on and off and adjusted in strength.
electric currenttap to flip
The flow of electric charge through a wire or circuit, usually carried by moving electrons.
solenoidtap to flip
A coil of wire, often wrapped around a core, that produces a magnetic field when electric current flows through it.
circuittap to flip
A complete path that allows electric current to flow from a power source, through components, and back again.
electric fieldtap to flip
The invisible region of space around a charged object where it can push or pull on other charged objects.
gravitational fieldtap to flip
The invisible region of space around any object with mass where it can pull other masses toward it.
inductiontap to flip
The process by which a changing magnetic field near a wire can create, or induce, an electric current in that wire.
electric chargetap to flip
A basic property of matter (positive or negative) that causes electric and magnetic forces between objects.
coretap to flip
A piece of material, often iron, placed inside a coil of wire to strengthen the magnetic field it produces.

Explore More

Read

Electromagnet

CK-12 Foundation
Open article →
Try the simulation

Faraday's Electromagnetic Lab

PhET Interactive Simulations
Launch simulation →

Current & Magnetic Fields | Magnetism | Physics | FuseSchool

FuseSchool - Global Education on YouTube
Watch on YouTube →

Chapter Review

1. What happens to the magnetic field around a wire when there is no electric current flowing through it?

2. An engineer wants to make an electromagnet stronger without changing the power source. Which two changes would help?

3. Why is an electromagnet, rather than a permanent magnet, used in a junkyard crane that lifts and drops cars?

4. Which three types of fields let objects exert forces on each other without touching?

5. Two charged balloons are brought closer together. Based on how electric forces work, what should happen to the force between them?

← PreviousMagnetism